Productinfo Wire EDM / Cutting
Wire EDM/Cutting
|
Several cutting strategies are available in a dedicated menu. These include functions for Plasma, Wire EDM, Waterjet cutting, Laser and Routers. Some special optional processes are able to fully automate approach, short stops (glue stops) Clockwise and Counterclockwise options and other commands such as left to right, up down strategies.
A simple nesting routine informs the operator of number of parts, margins and size of a sheet metal stock. For strip-fed machining the inner contour can be fully cut and the outer contours can be left connected to the strip so that only waste is dropped whilst parts remain attached to the feeder. Laser cutting, Waterjet and Routing
All relevant data dedicated to a specific contour name or depth can be used to control feed, cutting data or depth. Small contours may need a slower feed in order to avoid overshoot when cutting small holes. Higher feed rates can be attached to long contours.
|
2-/4-axis wire EDMWith the wire-EDM module the vector user creates NC-programs for 2-/4axis machining. Efficient processing routines guarantee a short programming time and high reliability. For 2D or 4D contours vectorcam generated roughing cuts and finishing cuts for stamps or matrix.
• Automatic wire threading and wire cut • Automatic positioning • Automatic calculation of the starting position • circulating and variable conik • surface machining • pendulum-cut • Destructive cut • etc.
|
Laser and other flat cutting processes can be fully automated using special Auto-Laser and contouring technology tables.
