More about our software
More about us
The module CNC-Laser / Cutting can be easily used for wire erosion, flame cutting, plasma cutting, water cutting, laser / laser marking and cutting plotter. These types of machining usually use 2D contours consisting of lines, arcs, nurbur splines, or any combination of these types of elements.
Taking into account the sheet size, edge distances, part distances, etc., a box module distributes the workpieces onto any board. For this purpose there is a module for simple rectangular boxing and a nesting box for selection. In addition, contours can also be dynamically positioned and moved.
After nesting, the user determines the order and direction of the machining, the contour start and stop, as well as the technology data for the cutting process.
Our experienced technicians are at your disposal for advice.
+49 (0) 5251 - 180 80 firstname.lastname@example.org
In addition to plasma and flame cutting, the vectorcam module also enables NC lasers as well as wire erosion. More information including videos can be found here:
Cutting with a laser or with a plasma or flame cutting nozzle is fully automatic and also requires only one command. Within this function, the user defines all relevant data for processing. The user always retains full control. A sorting function calculates either according to the user's specifications or chooses automatically the optimal processing sequence. At the same time it is possible to define gates / micro-bridges as well as various technology data.
With the wire EDM module, the vector user creates CNC programs for 2- / 4-axis machining. Efficient processing routines guarantee a short programming time and high operational safety. vectorcam also generates roughing and finishing cuts for punches or dies for 2D or 4D contours.